Single Band Bandpass Filters

$99.00

Single Band, self-contained, no power required. Available for all HF amateur bands 160, 80, 60, 40, 30, 20, 17, 15, 12 , 10 and (NEW!) 6M. These are the same modules used in our Model 600.

SKU: 300 Category:

Description

Model 300: Single Band Bandpass Filters

Single Band, self-contained, no power required. Available for all HF amateur bands 160, 80, 60, 40, 30, 20, 17, 15, 12 and 10 Meters, and now also available for 6 Meters. These are the same modules used in our Model 600. No adjustments required; just place in-line between transceiver and antenna or amplifier and you are ready to go.

CONSTRUCTION: The filters are 3-pole, top-C coupled. Hi-Q capacitors and inductors are used for tuned circuits. Filters are constructed on glass-epoxy PC boards. Inputs and outputs are at DC ground potentials. Aluminum Enclosure. Dimensions: HWD 2.0 X 6.0 X 1.75 Inches (including mounting flange). Ship Weight: 1-lb.

POWER RATINGS: Filters are intended for use with 200W PEP transceivers. This is not to imply a 100% duty cycle. For example, if you were to operate RTTY (100% duty) as much heating would occur as if you run SSB speech (50% duty) at the same power for twice that length of time. With compression, average power increases to 60-80% duty. CW average power is roughly comparable to speech.

SPECS:
Insertion: Typical, 0.5 – 0.7db
Rejection: Typical, 40db band-to-band
VSWR <1.5:1

                             Bandwidth

       160M   1.8  -  1.93            
        80M   3.5  -  3.85
        60m   5.268 - 5.439 (COVERS EURO)     
        40M   7.0  -  7.30
        30M  10.1  -  10.15
        20M  14.0  -  14.35
        17M  18.068 - 18.168      
        15M  21.0  -  21.450
        12M  24.89 -  24.99      
        10M  28.0  -  28.70
         6M  50.0  -  52.00
       

50 Ohm In and Out, Connectors: UHF

VSWR CONSIDERATIONS: VSWR can have a profound effect on the RF voltages and currents appearing in the bandpass filter. The better the SWR, the less likely you will be to experience difficulties. Every effort should be made to maintain minimum VSWR.

MORE INFORMATION: See the Dunestar Bandpass Filters Frequently Asked Questions.

PRICE: All Model 300 single-band filters are US$ 99.00.

Additional information

Weight 10.9 oz
Dimensions 6 × 2 × 1.75 in
Band

6 Meters, 10 Meters, 12 Meters, 15 Meters, 17 Meters, 20 Meters, 30 Meters, 40 Meters, 60 Meters, 80 Meters, 160 Meters

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.