Model 300-50: 6 Meter Bandpass Filter
The 300-50 6M Bandpass filter is the newest member of the 300-series filters. It is self-contained, no power required. No adjustments required just place in-line between transceiver and antenna or amplifier and you are ready to go.
CONSTRUCTION: The filters are 3-pole, top-C coupled. Hi-Q capacitors and inductors are used for tuned circuits. Filters are constructed on glass-epoxy PC boards. Inputs and outputs are at DC ground potentials. Aluminum Enclosure. Dimensions: HWD 2.0 X 6.0 X 1.75 Inches (including mounting flange). Ship Weight: 1-lb.
POWER RATINGS: Filters are intended for use with 200W PEP transceivers.
Insertion: Typical, 0.5-.7db
Rejection: Typical, 40db band-to-band
Bandwidth: 1.5/1 VSWR 6M 50.0 - 52.00
50 Ohm In and Out, Connectors: UHF
VSWR CONSIDERATIONS: VSWR can have a profound effect on the RF voltages and currents appearing in the bandpass filter. The better the SWR, the less likely you will be to experience difficulties. Every effort should be made to maintain minimum VSWR.
MORE INFORMATION: See the Dunestar Bandpass Filters Frequently Asked Questions.
TO ORDER: Model 300 is US$ 73.00.